Skip to main content

PayTrace

Table of Contents:


PayTrace

Working with Plug-ins

Plastic is a plug-in for FileMaker Pro and FileMaker Server that processes secure payments within FileMaker.

Requirements

FileMaker 7 or higher, Java Virtual Machine (JVM) 6 or higher, Windows or Mac OS X 10.6. Rosetta on Intel Macs not supported.

Installation

If you unzip the zip archive containing the plug-in files and open the top-level directory, you will find two subdirectories labeled WIN (for Windows) and MAC (for Macintosh). The WIN directory contains two plug-in files, one with a .fmx extension and another with a .fmx64 extension. The file with the .fmx64 extension is only used for FileMaker Server installations, which are explained below. The MAC directory contains a plug-in file with a .fmplugin extension.

To install the plug-in, copy the plug-in from the WIN or MAC folder to one of the directories listed below. Directory paths are listed relative to the parent directory of the installation home directory of the FileMaker application.

FileMaker Pro

FileMaker Pro <XX>/Extensions

FileMaker Pro <XX> Advanced/Extensions

FileMaker Server Web Publishing Engine (applies to the entire Web Publishing Engine prior to FileMaker Server 12.0.2 and to Instant Web Publishing only for FileMaker Server 12.0.2 and later)

FileMaker Server/Web Publishing/publishing-engine/wpc/Plugins (create the Plugins folder if it does not exist)

FileMaker Server Custom Web Publishing (applies only to FileMaker Server 12.0.2 and later)

FileMaker Server/Web Publishing/publishing-engine/cwpc/Plugins (create the Plugins folder if it does not exist)

Note:

For 64-bit versions of Windows, be sure to use the 360Works plug-in with a .fmx64 extension

FileMaker Server Scripting Engine (applies to FileMaker Server scheduled scripts)

FileMaker Server/Database Server/Extensions
Note:

Using the plug-in with the FileMaker Server Web Publishing Engine or the FileMaker Server Scripting Engine requires an Enterprise plug-in license.

Uninstalling the plug-in

Uninstall the plug-in by quitting FileMaker Pro or stopping FileMaker Server and removing the plug-in file from the appropriate Extensions or Plugins directory.

Demo mode and registering the plug-in

Plug-ins will run in a fully featured demo mode until they are registered. While running in demo mode, the plug-in will run for 2 hours at a time. In order to get another two hours of demo time, you must restart FileMaker Pro, FileMaker Server's database server module or FileMaker Server's Web Publishing Engine, depending upon where the plug-in is installed.

To register the plug-in in FileMaker Pro, you may either enter the license information in FileMaker plug-in preferences or by calling CCRegister inside a script. You must call CCRegister inside a script in order to register the plug-in for use with FileMaker Server.

Set Variable [ $register; Value: CCRegister ( $licenseKey; $registeredToName) ]

Returns: a 1 on success or a 0 on failure.

Error Handling/Reporting

When something unexpected happens, the plug-in will pop up a dialog showing what the error message is. This makes it easy to see what went wrong. However, in some cases, you (the developer) may prefer to show your own message to the user, or possibly not show a message at all. In that case, you can call CCSetErrorCapture ( true ). This will suppress the displaying of error dialogs.

Whether or not you suppress the error dialogs, a plugin function will return the word ERROR if something goes wrong. It's a good idea to check the result of each plugin function call to determine if an error occurred. If an error occurs, use the CCLastError function to get a detailed message describing the error. For example:

Set Variable [ $result; Value: MyPluginFunction("x" ; "y" ; "z") ]
If [ $result = "ERROR" ]
Show Custom Dialog [ "An error occurred: " & CCLastError ]
End If

If a plug-in is not installed correctly, all plug-in function calls will return "?".

To check if a transaction succeeded

The simplest way to check to see if money has changed hands in a payment processing function call is to check the result of the function itself. This is extremely useful when calling functions such as CCProcessPayment and CCProfileProcessPayment. The result of the transaction will give a transaction ID or the word ERROR. Using the CCLastError like in the example above will give further information about the error, such as if there is no network connectivity, or the card was declined.

Set Variable [ $result; Value: CCProcessPayment(...) ]
If [ $result = "ERROR" ]
# Transaction is unsuccessful. Below is an example of how you might handle the error.
Set Field [ Transaction::Error Message ; CCLastError ]
Else
# Transaction is successful.
Set Field [ Transaction::Transaction ID ; $result ]
End If

More Information

For more information on how to correctly install and work with plug-ins, check out the Plugins 101 documentation.

PayTrace

The PayTrace gateway supports a wide variety of transactions, profile based payments, and subscription payments. For detailed examples of each of these transactions, check the demo file included with your download of Plastic. These scripts are ready for insertion into your own solution!

Getting an account

You'll need an account using the PayTrace Gateway, and use your username and the password as the first two parameters for every plug-in function call that performs a transaction.

Set Variable [ $result; Value:
CCProcessPayment (
$userName;
$password; ...) ]

It is the credentials you enter into the below screen that you will provide to Plastic.

a PayTrace page with a login interface circled

Setting the Gateway

Before processing any payments, you need to tell Plastic which gateway you are using. This is done by calling CCSetGateway.

Set Variable [ $gateway; Value: CCSetGateway("paytrace") ]

Returns: 1 if a valid gateway is provided, ERROR on failure.

If running card-present charges, you should also set cardPresent to true when setting the gateway.

Set Variable [ $gateway; Value: CCSetGateway("paytrace"; "cardPresent=true") ]

Test Mode

To run test transactions, call CCSetTestMode( 1 ) - If set to 1, tells Plastic to perform all subsequent transactions as test transactions. If CCSetTestMode( 0 ) is called, Plastic will perform all subsequent transactions as live transactions. If this function is never called, the default behavior of Plastic is to treat all transactions as live transactions.

Emulators And Alternate URLs

If you would like to use Plastic to perform transactions against an alternate URL, call the CCSetGateway function with the additional parameter url, whose value would correspond to the alternate url. A gateway emulator is a common use case for an alternate URL. Gateway emulators fashion an application programming interface that resembles that of a competing gateway to ease the integration process for merchants who switch to their gateway.

Example of communicating with a gateway that provides an Authorize.Net emulator at the URL http://AlternateURLGoesHere.com

Set Variable [ $result; Value: CCSetGateway ("paytrace" ; "url=http://AlternateURLGoesHere.com/") ]

The call to CCSetGateway acts as a flag, so all subsequent transactions will point to the alternate URL until otherwise specified or FileMaker is restarted.

Processing Payments

Basic Credit Card Charge

NOTE: The sandbox mode of PayTrace will only allow you to test using specific, preconfigured cards. For example, to test Visa purchases, you use the card number 4012000098765439 with the expiration date 12/24.

This simple example will run a single charge and requires you to input a card number and expiration date. To prevent this information from being saved in your database and to simplify PCI compliance, jump to the Payment Profiles section.

Once you properly configure your merchant account, you can quickly and easily process payment transactions.

You must provide the following information for a credit card payment transaction:

  • userName
  • password
  • dollar amount
  • credit card number
  • credit card expiration date (Format the expiration date as MMYY or MM/YY or MM/DD/YY)

The CCProcessPayment function will process a transaction and return a transaction ID. This function returns a transaction ID if the transaction is successful or the word ERROR if the transaction fails. For detailed information about the most recent transaction failure, call the CCLastError function before calling any other transaction-processing function.

In your script, you would then have a second line after setting the gateway.

Set Variable [ $result; Value:
CCProcessPayment(
$userName;
$password;
$chargeAmount;
$cardNumber;
$expDate) ]

Returns: a verification code from the payment gateway service if the order is successful, or ERROR if there was a problem

Note:

It is important to store the resulting transaction ID because you may need it later to void the transaction, issue a refund or capture a previously authorized transaction.

You may submit optional parameters to most of Plastic's payment-transaction processing functions. These parameters will be submitted to the payment gateway along with the basic transaction information. Although they are not usually required to process an order, these parameters can be useful for tasks such as address verification or linking a transaction to a customer id or an invoice number. To supply additional parameters to a function call, add them to the end of the parameter list after the last required parameter, using a "key=value" syntax.

Set Variable [ $result; Value:
CCProcessPayment(
$userName;
$password;
$chargeAmount;
$cardNumber;
$expDate;
"chargeDescription=" & Payment::description;
"verificationCode=" & $securityCode) ]
Expand for Optional Parameters
ParameterDescription
verificationCodeThe numeric verification code on the credit card. This is also known as Card Security Code (CSC), Card Verification Value (CVV), Card Verification Value Code (CVVC), Card Verification Code (CVC), or Verification Code (V-Code/V Code).
invoiceNumberAn arbitrary invoice number for your records.
chargeDescriptionBrief description of the charges.
customerIdAn arbitrary customer ID for your records.
firstNameFirst (given) name of the credit card holder.
lastNameLast (surname) of the credit card holder.
emailThe card holder's email address.
phoneThe card holder's phone number.
faxThe card holder's fax number.
addressThe billing address.
address2The billing address second line.
cityThe billing address city.
stateThe billing address state.
zipThe billing address zip.
countryBilling address country.
shipFirstNameThe shipping recipient's first name.
shipLastNameThe shipping recipient's last name.
shipAddressThe shipping street address.
shipAddress2The shipping street address second line.
shipCityThe shipping address city.
shipStateThe shipping address state.
shipZipThe shipping address zip.
shipCountryThe shipping address country.

Processing ACH payments

Plastic now supports payments via direct bank transfers and eChecks, via ACH payments. To take a payment via eCheck, use the CCProcessPaymentACH function after calling the gateway.

Set Variable [ $result; Value:
CCProcessPaymentACH (
$userName;
$password;
$dollarAmount;
$accountNumber;
$routingNumber;
"";
"";
$accountHolderFirstName;
$accountHolderLastName;
"" ) ]

With PayTrace, a bank name, account type, and check number are not required, so leave them blank by passing ""; Optional Parameters:

ParameterDescription
invoiceNumberan arbitrary invoice number for your records
chargeDescriptionbrief description of the charges
customerIdan arbitrary customer ID for your records
firstNameFirst (given) name of the credit card holder
lastNameLast (surname) of the credit card holder
emailthe card holder's email address
phonethe card holder's phone number
faxthe card holder's fax number
addressthe billing address
address2the billing address second line
citythe billing address city
statethe billing address state
zipthe billing address zip
countrybilling address country
shipFirstNamethe shipping recipient's first name
shipLastNamethe shipping recipient's last name
shipAddressthe shipping street address
shipAddress2the shipping street address second line
shipCitythe shipping address city
shipStatethe shipping address state
shipZipthe shipping address zip
shipCountrythe shipping address country

Authorizing and Capturing Payments

A sale transaction for credit card contains two parts: an authorization which verifies and places a hold for the amount, and a capture, which actually transfers the funds.

To run an authorization, pass in an additional parameter "authMode=AUTH_ONLY".

Set Variable [ $result; Value:
CCProcessPayment(
$userName;
$password;
$chargeAmount;
$cardNumber;
$expDate;
"authMode=AUTH_ONLY") ]

Returns: a verification code from PayTrace if the order is successful, or ERROR if there was a problem

After running an authorization, run the appropriate CCProcessAuthorizedPayment. Pass in the previousTransactionId from the transaction ID you received from the process with authMode.

Set Variable [ $result; Value:
CCProcessAuthorizedPayment(
$userName;
$password;
$previousTransactionId;
$dollarAmount) ]

The dollarAmount is not required to process the authorized payment.

Using Card Readers

Certain types of merchant accounts are set up for reading physical card swipes, instead of taking orders via the web or over the phone. If your account is a card-present account, like a retail store, then you will need to also send the data included on the magnetic stripe of a card.

Important!

You should pass in swipe data if you have it, as your transaction may be downgraded to a more expensive rate if you simply type a card number.

First, set the gateway with card-present parameter

To process a card-present transaction, first call CCSetGateway with the parameter cardPresent=true. If CCSetGateway returns a 1, then you can perform a card-present transaction.

Second, determine your Track 1 and 2 formats

To process a payment using card-present accounts, you'll need the information in the magnetic stripe of the credit card. In Plastic, this information may be obtained from a keyboard-emulating card reader, which essentially dumps text into a text field when the card is swiped as if the text had been entered via a keyboard.

While some card readers will contain software that parses that raw data from the magnetic stripe before dumping it to a field, this documentation refers to those keyboard-emulating readers that dump raw data. Raw swipe data contains two delimited pieces of information: Track 1 and Track 2.

Raw data would look something like this:

%B1234123412341234^LAST/FIRSTM^1112101000000000011100111000000?;1234123412341234=11121010000000000111?

Track 1 is delimited by a percent symbol and a question mark, so in the previous example Track 1 would be:

%B1234123412341234^LAST/FIRST/^1112101000000000011100111000000?

Track 2 is delimited by a semicolon and question mark, so in the previous example Track 2 would be:

;1234123412341234=11121010000000000111?
Note:

As a convenience, the Plastic function CCTrackData will parse either Track 1 or Track 2 data as a return-separated string containing account code, cardholder name, expiration date (YYMM), and optional discretionary data.

Process the payment with CCProcessPayment

Finally, call CCProcessPayment and pass in raw swipe or track data. When processing a card-present transaction, a gateway will typically require you to pass in either the full raw swipe, Track 1 or Track 2. In most cases, you do not need to pass in card numbers and expiration dates.

Set Variable [ $result; Value:
CCProcessPayment(
$userName;
$password;
$chargeAmount;
"";
"";
"swipe=%B1234123412341234^LAST/FIRST/^1112101000000000011100111000000?") ]

Partial Transactions

When using CCProcessPayment, specifying the additional parameter "authMode=AUTH_ONLY" will perform an authorization as opposed to a sale transaction. Specifying the "isPartialAuthorization=true" parameter will tell the gateway to allow for partial authorizations of pre-paid credit cards, gift cards and debit cards.

After specifying a partial authorization, you can request the remaining balance and the requested amount by using CCPartialGetRemainingBalance and CCPartialGetRequestedAmount. Both return the dollar amounts, and do not require any additional parameters.

Voiding Transactions

Set Variable [ $result; Value:
CCVoidPayment (
$userName;
$password;
$previousTransactionID) ]

Voids a previously processed payment. The parameters are similar to the CCProcessPayment function, except dollarAmount is replaced with the addition of the previousTransactionID parameter. The previousTransactionID should be the transactionID of the transaction you wish to void. This value is returned by the CCProcessPayment function. Alternately, you can use the CCLastPaymentTransactionID function to get the transactionID of the last processed payment.

Parameters:

  • userName
    • Your payment gateway merchant account name. In the case of PayTrace, this is userName.
  • password
    • Your merchant account password OR transaction key. In the case of PayTrace, this is password.
  • previousTransactionID
    • The transactionId of a previously processed transaction.

Note that CCVoidPayment will only work on orders that have not settled yet, which means that it will generally only work on payments made that same day. To void settled orders, use CCRefund instead.

Returns: the transactionID from the payment gateway service if the order is successful, or ERROR if there was a problem.

See also: CCLastPaymentTransactionID: the transactionID from the payment gateway service if the order is successful, or ERROR if there was a problem (use CCLastError for more detailed information about the nature of the error).

Crediting or Refunding Transactions

To credit a transaction, you need the transaction ID returned by CCProcessPayment. Pass this (along with other payment info) to the CCRefund function. This is similar to the void process, except it accepts a dollar amount and the credit card number (or the last four digits of the credit card number) used to process the original transaction.

Set Variable [ $result; Value:
CCRefund(
$userName;
$password;
$transactionID;
$cardNumber;
$dollarAmount) ]

Returns: the transactionID from PayTrace if the order is successful, or ERROR if there was a problem

Dollar amount is NOT a required value, and leaving it blank will simply refund the whole transaction.

To refund an ACH payment, pass in the account number in the card number slot. It also requires adding routingNumber and "methodOfPayment=ACH" as parameters:

Set Variable [ $result; Value:
CCRefund(
$userName;
$password;
$previousTransactionId;
$accountNumber;
$amountToCredit; //Optional
""=" & Payment::"routingNumber
"methodOfPayment=ACH") ]

You can also use CCRefund to do an unlinked credit, which will run a refund of the amount without requiring a transaction ID. Pass in blank values ""; for the previous transaction ID to perform this type of transaction.

To do an unlinked credit with PayTrace, pass in the blank transaction ID. It will be a little different based on whether it was a swiped or a typed card, or if it was an ACH:

  • Card Not Present Unlinked Refund
    • Set Variable [ $result; Value:
      CCRefund(
      $userName;
      $password;
      "";
      $cardNumber;
      $amountToCredit;
      "expirationDate=12/13") ]
  • Card-Present Unlinked Refund
    • Set Variable [ $result; Value:
      CCRefund(
      $userName;
      $password;
      "";
      "";
      $amountToCredit;
      ""=" & Payment::"swipe ]

CCRefund, no matter the type of refund, accepts the following parameters:

Expand for Optional Parameters
ParameterDescription
verificationCodeThe numeric verification code on the credit card. This is also known as Card Security Code (CSC), Card Verification Value (CVV), Card Verification Value Code (CVVC), Card Verification Code (CVC), or Verification Code (V-Code/V Code).
invoiceNumberAn arbitrary invoice number for your records.
chargeDescriptionBrief description of the charges.
customerIdAn arbitrary customer ID for your records.
firstNameFirst (given) name of the credit card holder.
lastNameLast (surname) of the credit card holder.
emailThe card holder's email address.
phoneThe card holder's phone number.
faxThe card holder's fax number.
addressThe billing address.
address2The billing address second line.
cityThe billing address city.
stateThe billing address state.
zipThe billing address zip.
countryBilling address country.
shipFirstNameThe shipping recipient's first name.
shipLastNameThe shipping recipient's last name.
shipAddressThe shipping street address.
shipAddress2The shipping street address second line.
shipCityThe shipping address city.
shipStateThe shipping address state.
shipZipThe shipping address zip.
shipCountryThe shipping address country.

Subscription Services

With subscriptions, payments can automatically be debited to a credit card or a bank account on a time period you specify. If your gateway supports it, there may be up to five functions used to manage subscriptions: CCCreateSubscription, CCCreateSubscriptionACH, CCModifySubscription, CCModifySubscriptionACH, and CCDeleteSubscription.

PayTrace supports all five subscription functions. Creating and modifying subscriptions all accept a chargeDescription as an optional parameter.

Valid pay periods include annually, semi-annually, trimesterly, quarterly, bi-monthly, monthly, bi-weekly, first-and-fifteenth, weekly, and daily. The number of installments specify how many transactions to run. A six-month subscription would specify a payPeriod of monthly, and 6 installments.

To create a credit card subscription, use CCCreateSubscription. To create a bank account subscription, use CCCreateSubscriptionACH. You'll need to assign a customerProfileId that will be used for future subscription modifications.

CCCreateSubscriptionCCCreateSubscriptionACH
userNameuserName
passwordpassword
dollarAmountdollarAmount
cardNumberaccountNumber
expirationDateabaRoutingNumber
"";"";
numberOfInstallments"";
startDateaccountHolderFirstName
payPeriodaccountHolderLastName
"";"";
"customerProfileId="numberOfInstallments
startDate
payPeriod
"";
"customerProfileId="

Returns: 1 on success, or ERROR if there was a problem.

After a subscription has been created, it can be modified with CCModifySubscription. If the original subscription was a bank account you'll use CCModifySubscriptionACH. Italicized items are optional, and can accept "" if not needed.

CCModifySubscriptionCCModifySubscriptionACH
userNameuserName
passwordpassword
previousSubscriptionIdpreviousSubscriptionId
dollarAmountdollarAmount
cardNumberaccountNumber
expirationDateabaRoutingNumber
"";"";
numberOfInstallments"";
startDateaccountHolderFirstName
payPeriodaccountHolderLastName
"";"";
numberOfInstallments
startDate
payPeriod
"";

Returns: 1 on success, or ERROR if there was a problem.

To cancel a subscription, use CCDeleteSubscription:

CCDeleteSubscription
userName
password
previousSubscriptionId

Returns: 1 on success, or ERROR if there was a problem.

There are no optional parameters with deleting a subscription.

Payment Profiles

Creating Payment Profiles

Payment profiles allow you to save payment information straight to the gateway for future use. To create a payment profile, call either CCProfileCreatePayment or CCProfileCreatePaymentACH, depending on whether the payment profile is a credit card or ACH. Credit cards are created with CCProfileCreatePayment and updated with CCProfileUpdatePayment. Italicized items are optional.

To create a payment, pass in a customerProfileId, which is a unique ID you create and use for modifying or running payments. Italicized items are optional, and can accept "" if not needed.

CCProfileCreatePaymentCCProfileUpdatePayment
userNameuserName
passwordpassword
customerProfileIdcustomerProfileId
cardNumber""
expirationDatecardNumber
"firstName="expirationDate
"lastName=""firstName="
"lastName="
CCProfileCreatePaymentACHCCProfileUpdatePaymentACH
userNameuserName
passwordpassword
customerProfileIdcustomerProfileId
accountNumber""
routingNumberaccountNumber
""routingNumber
""""
accountHolderFirstName""
accountHolderLastNameaccountHolderFirstName
accountHolderLastName

Optional Parameters:

Parameters
email
phone
fax
address
address2
city
state
zip
shipFirstName
shipLastName
shipAddress
shipAddress2
shipCity
shipState
shipZip
shipCountry

Returns: 1 on success, or ERROR if there was a problem.

After creation, payments can be deleted with CCProfileDeletePayment.

CCProfileDeletePayment
userName
password
customerProfileId
"";

Returns: 1 on success, or ERROR if there was a problem.

Running Charges Against Profiles

You can process a payment, authorize a payment, capture an authorized payment, void, and refund transactions. Make sure to add the "methodOfPayment=ACH" or "methodOfPayment=CC" to each transaction, except authorized payments.

If you want to run authorize only transactions, use CCProfileProcessPayment and add "authMode=AUTH_ONLY" to the list of parameters. To then capture that transaction, run CCProfileProcessAuthorizedPayment. Italicized items are optional, and can accept "" if not needed.

CCProfileProcessPaymentCCProfileProcessAuthorizedPaymentCCProfileRefundCCProfileVoidPayment
userNameuserNameuserNameuserName
passwordpasswordpasswordpassword
customerProfileIdcustomerProfileIdcustomerProfileIdcustomerProfileId
"";"";"";"";
dollarAmountpreviousTransactionIdpreviousTransactionIdpreviousTransactionId
"methodOfPayment="dollarAmount"methodOfPayment="amountToCredit
authMode"";

Returns: Payments return a transaction ID from the payment gateway service if the transaction is successful, or ERROR if there was a problem. Refunds and voids will return 1 on success, or ERROR if there was a problem.

CCProfileProcessPayment and CCProfileRefund accept the following parameters as well:

Expand for Optional Parameters
ParameterDescription
verificationCodeThe numeric verification code on the credit card. This is also known as Card Security Code (CSC), Card Verification Value (CVV), Card Verification Value Code (CVVC), Card Verification Code (CVC), or Verification Code (V-Code/V Code).
invoiceNumberAn arbitrary invoice number for your records.
chargeDescriptionBrief description of the charges.
customerIdAn arbitrary customer ID for your records.
firstNameFirst (given) name of the credit card holder.
lastNameLast (surname) of the credit card holder.
emailThe card holder's email address.
phoneThe card holder's phone number.
faxThe card holder's fax number.
addressThe billing address.
address2The billing address second line.
cityThe billing address city.
stateThe billing address state.
zipThe billing address zip.
countryBilling address country.
shipFirstNameThe shipping recipient's first name.
shipLastNameThe shipping recipient's last name.
shipAddressThe shipping street address.
shipAddress2The shipping street address second line.
shipCityThe shipping address city.
shipStateThe shipping address state.
shipZipThe shipping address zip.
shipCountryThe shipping address country.

Getting Information

Plastic includes a number of helper functions that allow users to retrieve data from the gateway or Plastic.

To execute any of these functions inside a script, use a Set Field or Set Variable script step.

  • CCGetCardIssuer
    • Format: CCGetCardIssuer( $cardNumber )
    • Description: Returns the card issuer for a given card number, either: VISA, MASTERCARD, AMEX, DINERS, DISCOVER, JCB. Returns an error if the card number is from another issuer.
  • CCGetLast
    • Format: CCGetLast ( $name )
    • Description: Returns a value from the most recent transaction response that corresponds with the name parameter.
  • CCLastAVS
    • Description: Returns the gateway's Address Verification System Response for the last payment which was processed. This response is typically a one letter indicator, meaning the following:
CodeDescriptionNetwork
AStreet address matches, but 5-digit and 9-digit postal code do not match.Standard domestic
BStreet address matches, but postal code not verified.Standard international
CStreet address and postal code do not match.Standard international
DStreet address and postal code match. Code "M" is equivalent.Standard international
EAVS data is invalid or AVS is not allowed for this card type.Standard domestic
GNon-U.S. issuing bank does not support AVS.Standard international
IAddress not verified.Standard international
MStreet address and postal code match. Code "D" is equivalent.Standard international
NStreet address and postal code do not match.Standard domestic
PPostal code matches, but street address not verified.Standard international
RSystem unavailable.Standard domestic
SBank does not support AVS.Standard domestic
UAddress information unavailable. Returned if the U.S. bank does not support non-U.S. AVS or if the AVS in a U.S. bank is not functioning properly.Standard domestic
WStreet address does not match, but 9-digit postal code matches.Standard domestic
XStreet address and 9-digit postal code match.Standard domestic
YStreet address and 5-digit postal code match.Standard domestic
ZStreet address does not match, but 5-digit postal code matches.Standard domestic
  • CCLastCCV
    • Description: Returns the gateway's Card Code Verification Response for the last payment which was processed. This response is typically a one letter indicator, meaning the following:
      • M - CVV2/CVC2 Match - Indicates that the card is authentic. Complete the transaction if the authorization request was approved.
      • N - CVV2 / CVC2 No Match – May indicate a problem with the card. Contact the cardholder to verify the CVV2 code before completing the transaction, even if the authorization request was approved.
      • P - Not Processed - Indicates that the expiration date was not provided with the request, or that the card does not have a valid CVV2 code. If the expiration date was not included with the request, resubmit the request with the expiration date.
      • S - Merchant Has Indicated that CVV2 / CVC2 is not present on card - May indicate a problem with the card. Contact the cardholder to verify the CVV2 code before completing the transaction.
      • U - Issuer is not certified and/or has not provided visa encryption keys
  • CCLastChargeResult
    • Description: Returns the gateway's result code for the last operation.
  • CCLastPaymentAuthCode
    • Description: Returns the gateway's approval code for the last payment which was processed with CCProcessPayment.
  • CCLastPaymentTransactionID
    • Description: Returns the gateway's transaction ID for the last payment which was processed with CCProcessPayment.
  • CCLastRawResponse
    • Description: Returns the gateway's raw text response for the most recent transaction.
  • CCValidateCardNumber
    • Format: CCValidateCardNumber( $cardNumber )
    • Description: Determines if a card number is valid. Does not indicate the validity of the card itself, only its number. Returns either a 1 for valid card, or 0 for invalid cards.
  • CCLastError
    • Description: Returns the text of the last error triggered by a plugin function.
  • CCLicenseInfo
    • Description: Returns information about the license used.
  • CCVersion
    • Description: Returns the version of the credit card plugin which is installed.

Getting Help

If you still need help, there are several resources available! FMForums hosts a support forum for 360Works products. Please look through the posts and see if your question has been posted before making a new topic.

Support is also available via email at support@360works.com. You can also call us at 770-234-9293. We offer many services in addition to our plug-ins, so let us know if you'd like a little help integrating the plug-in into your solution. If you'd be interested in a customized plug-in or development, please let us know! We have many certified FileMaker developers on staff who can help you with your project.