Moneris

Working with Plug-ins

Plastic 2 is a plug-in for FileMaker Pro and FileMaker Server that processes secure payments within FileMaker.

Requirements

FileMaker 7 or higher, Java Virtual Machine (JVM) 6 or higher, Windows or Mac OS X 10.6. Rosetta on Intel Macs not supported.

Installation

If you unzip the zip archive containing the plug-in files and open the top-level directory, you will find two subdirectories labeled WIN (for Windows) and MAC (for Macintosh). The WIN directory contains two plug-in files, one with a .fmx extension and another with a .fmx64 extension. The file with the .fmx64 extension is only used for FileMaker Server installations, which are explained below. The MAC directory contains a plug-in file with a .fmplugin extension.

To install the plug-in, copy the plug-in from the WIN or MAC folder to one of the directories listed below. Directory paths are listed relative to the parent directory of the installation home directory of the FileMaker application.

FileMaker Pro

FileMaker Pro XX/Extensions

FileMaker Pro XX Advanced/Extensions

FileMaker Server Web Publishing Engine (applies to the entire Web Publishing Engine prior to FileMaker Server 12.0.2 and to Instant Web Publishing only for FileMaker Server 12.0.2 and later)

FileMaker Server/Web Publishing/publishing-engine/wpc/Plugins (create the Plugins folder if it does not exist)

FileMaker Server Custom Web Publishing (applies only to FileMaker Server 12.0.2 and later)

FileMaker Server/Web Publishing/publishing-engine/cwpc/Plugins (create the Plugins folder if it does not exist)

Note: For 64-bit versions of Windows, be sure to use the 360Works plug-in with a .fmx64 extension

FileMaker Server Scripting Engine (applies to FileMaker Server scheduled scripts)

FileMaker Server/Database Server/Extensions

Note: Using the plug-in with the FileMaker Server Web Publishing Engine or the FileMaker Server Scripting Engine requires an Enterprise plug-in license.

Uninstalling the plug-in

Uninstall the plug-in by quitting FileMaker Pro or stopping FileMaker Server and removing the plug-in file from the appropriate Extensions or Plugins directory.

Demo mode and registering the plug-in

Plug-ins will run in a fully featured demo mode until they are registered. While running in demo mode, the plug-in will run for 2 hours at a time. In order to get another two hours of demo time, you must restart FileMaker Pro, FileMaker Server's database server module or FileMaker Server's Web Publishing Engine, depending upon where the plug-in is installed.

To register the plug-in in FileMaker Pro, you may either enter the license information in FileMaker plug-in preferences or by calling CCRegister inside a script. You must call CCRegister inside a script in order to register the plug-in for use with FileMaker Server.

Set Variable [ $register; Value: CCRegister ( $licenseKey, $registeredToName) ]

Returns: a 1 on success or a 0 on failure.

Error Handling/Reporting

When something unexpected happens, the plug-in will pop up a dialog showing what the error message is. This makes it easy to see what went wrong. However, in some cases, you (the developer) may prefer to show your own message to the user, or possibly not show a message at all. In that case, you can call CCSetErrorCapture ( true ). This will suppress the displaying of error dialogs.

Whether or not you suppress the error dialogs, a plugin function will return the word "ERROR" if something goes wrong. It's a good idea to check the result of each plugin function call to determine if an error occurred. If an error occurs, use the CCLastError function to get a detailed message describing the error. For example:

Set Variable [ $result = MyPluginFunction("x" ; "y" ; "z") ]
If [ $result = "ERROR" ]
  Show Custom Dialog [ "An error occurred: " & CCLastError ]
End If

If a plug-in is not installed correctly, all plug-in function calls will return "?"

To check if a transaction succeeded

The simplest way to check to see if money has changed hands in a payment processing function call is to check the result of the function itself. This is extremely useful when calling functions such as CCProcessPayment and CCProfileProcessPayment. The result of the transaction will give a transaction ID or the word ERROR. Using the CCLastError like in the example above will give further information about the error, such as if there is no network connectivity, or the card was declined.

Set Variable[$result ; CCProcessPayment(...)]
If[$result = "ERROR"]
	#Transaction is unsuccessful. Below is an example of how you might handle the error. 
	Set Field[Transaction::Error Message ; CCLastError]
Else
	#Transaction is successful.
	Set Field[Transaction::Transaction ID ; $result]
End If

More Information

For more information on how to correctly install and work with plug-ins, check out the Plugins 101 documentation.

Moneris

The Moneris gateway supports running credit card transactions, authorize only transactions, and subscription payments. For detailed examples of each of these transactions, check the demo file included as a download with Plastic 2. These scripts are ready for insertion into your own solution!

Setting the Gateway

Before processing any payments, you need to tell Plastic which gateway you are using. This is done by calling CCSetGateway.

Set Variable [$gateway; Value: CCSetGateway("Moneris") ]

Processing Payments

Basic Credit Card Charge

Once you properly configure your merchant account, you can quickly and easily process payment transactions. You must provide the following information for a credit card payment transaction:

• store ID
• password
• dollar amount
• credit card number
• credit card expiration date
• order ID

Moneris also requires an Order ID in combination with the standard requirements for the function. You can pass in this extra, required variable by adding "orderId=12432342" to the end of the statement.

The CCProcessPayment function will process a transaction and return a transaction ID. This function returns a transaction ID if the transaction is successful or the word ERROR if the transaction fails. For detailed information about the most recent transaction failure, call the CCLastError function before calling any other transaction-processing function. In your script, you would then have a second line after setting the gateway.

Set Variable $result Value: 
CCProcessPayment(
storeId, 
password;
chargeAmount;
cardNumber;
expDate;
"orderId=213214321")

Note: It is important to store the resulting transaction ID because you may need it later to void the transaction, issue a refund or capture a previously authorized transaction.

You may submit optional parameters to most of Plastic's payment-transaction processing functions. These parameters will be submitted to the payment gateway along with the basic transaction information. Although they are not usually required to process an order, these parameters can be useful for tasks such as address verification or linking a transaction to a customer id or an invoice number. To supply additional parameters to a function call, add them to the end of the parameter list after the last required parameter, using a "key=value" syntax.

Set Variable $result Value:
CCProcessPayment(
storeId,
 password;
chargeAmount;
cardNumber;
expDate;
"orderId=32432432";
"chargeDescription=" & Transaction::Description;
"verificationCode=" & $securityCode)

Click Expand to see the list of optional parameters:

Parameter	Description
verificationCode	the numeric verification code on the credit card. This is also known as Card Security Code (CSC), Card Verification Value (CVV), Card Verification Value Code (CVVC), Card Verification Code (CVC) or Verification Code (V-Code/V Code)
customerId	an arbitrary customer ID for your records
firstName	First (given) name of the credit card holder
lastName	Last (surname) of the credit card holder
email	the card holder's email address
fax	the card holder's fax number
companyName
phone	the card holder's phone number
address	the billing address
city	the billing address city
state	the billing address state
zip	the billing address zip
country	billing address country
shipAddress	the shipping street address
shipCity	the shipping address city
shipCompanyName	the shipping recipient's company name
shipCountry	the shipping address country
shipFirstName	the shipping recipient's first name
shipLastName	the shipping recipient's last name
shipState	the shipping address state
shipZip	the shipping address zip

Authorizing and Capturing Payments

A sale transaction for credit card contains two parts: an authorization which verifies and places a hold for the amount, and a capture, which actually transfers the funds.

To run an authorization, pass in an additional parameter authMode=AUTH_ONLY.

Set Variable $result Value:
CCProcessPayment(
storeId,
 password;
chargeAmount;
cardNumber;
expDate;
"orderId=32432432";
authMode=AUTH_ONLY)

After running an authorization, run the appropriate CCProcessAuthorizedPayment. Pass in the previousTransactionId from the transaction ID you received from the process with authMode.

Set Variable [$result Value:
CCProcessAuthorizedPayment (
storeId,
 password;
previousTransactionId;
"orderId=32432432")

Partial Transactions

Using "isPartailAuthroization=true" and splitTenderId

When using CCProcessPayment, specifying the additional parameter "authMode=AUTH_ONLY" will perform an authorization as opposed to a sale transaction. Specifying the "isPartialAuthorization=true" parameter will tell the gateway to allow for partial authorizations of pre-paid credit cards, gift cards and debit cards. Specifying the splitTenderId parameter tells the gateway that the amount authorized for the current transaction will be applied toward the remaining balance of a previous transaction identified by the split tender ID.

When using CCProcessAuthorizedPayment, users can also pass in the splitTenderId instead of the previous transaction ID. This will capture the authorized amount from a previous transaction.

Charging the Outstanding Balance

After specifying a partial authorization, you can request the remaining balance and the requested amount by using CCPartialGetRemainingBalance and CCPartialGetRequestedAmount. Both return the dollar amounts, and do not require any additional parameters. You can also retrieve the splitTenderId with CCLastSplitTenderId.

Voiding Transactions

Set Variable [$result; Value: 
CCVoidPayment (
 storeId ;
 password ;
 previousTransactionID;
 "orderId=32432432")]

Voids a previously processed payment. The parameters are similar to the CCProcessPayment function, except dollarAmount is replaced with the addition of the previousTransactionID parameter. The previousTransactionID should be the transaction ID of the transaction you wish to void. This value is returned by the CCProcessPayment function. Alternately, you can use the CCLastPaymentTransactionID function to get the transactionID of the last processed payment.

Parameters:

storeId - your payment gateway merchant account name

password - your merchant account password OR transaction key.

previousTransactionID - the transactionId of a previously processed transaction.

Note that CCVoidPayment will only work on orders that have not settled yet, which means that it will generally only work on payments made that same day. To void settled orders, use CCRefund instead.

See also: CCLastPaymentTransactionIDReturns: the transactionID from the payment gateway service if the order is successful, or "ERROR" if there was a problem (use CCLastError for more detailed information about the nature of the error)

Crediting or Refunding Transactions

To credit a transaction, you need the transaction ID returned by CCProcessPayment. Pass this (along with other payment info) to the CCRefund function. This is similar to the void process, except it accepts a dollar amount and the credit card number (or the last four digits of the credit card number) used to process the original transaction.

Set Variable [$result; Value:
CCRefund( 
storeId; 
password; 
transactionID; 
cardNumber; 
dollarAmount;
"orderId=32432432")] 

You can also use CCRefund to do an unlinked credit, which will run a refund of the amount without requiring a transaction ID. Pass in blank values ""; for the previous transaction ID to perform this type of transaction.

To do an unlinked credit with Moneris, pass in the blank transaction ID. and use CCRefund with the expiration date.

Set Variable [$result Value:CCRefund(
storeId,
password;
"";
cardNumber;
amountToCredit;
"expirationDate=12/13";
"orderId=32432432")]

Subscription Services

With subscriptions, payments can automatically be debited to a credit card or a bank account on a time period you specify. Subscriptions are created with CCCreateSubscription, and modified with CCModifySubscription. A successful subscription creation will return a subscription ID, which you can then use to modify or delete.

Valid pay periods may include monthly, yearly and the like. Frequency indicates how often in that period. For example, a biweekly subscription would have a pay period of weekly and a frequency of 2. The number of installments specify how many transactions to run total.

CCCreateSubscription	CCModifySubscription
storeId	storeId
password	password
dollarAmount	previousSubscriptionId
cardNumber	dollarAmount //Optional, pass ""; if not needed
expirationDate	cardNumber //Optional
""	expirationDate //Optional
numberOfInstallments	""
startDate	numberOfInstallments //Optional
payPeriod	"";
frequency	"";
"orderId=1232313"	"";
trialAmount*	orderId
verificationCode	customerId
customerId
firstName
lastName
email
fax
companyName
phone
address
city
state
zip
country
shipAddress
shipCity
shipCompanyName
shipCountry
shipFirstName
shipLastName
shipState
shipZip

If you specify a trialAmount, the a charge will be performed for the trialAmount prior to the start of the subscription.

To cancel a subscription, use CCDeleteSubscription:

CCDeleteSubscription

storeId

password

previousSubscriptionId

Getting Information

Plastic includes a number of helper functions that allow users to retrieve data from the gateway or Plastic.

To execute any of these functions inside of a script, use a Set Field or Set Variable script step.

• CCGetCardIssuer(cardNumber) - returns the card issuer for a given card number, either: VISA, MASTERCARD, AMEX, DINERS, DISCOVER, JCB. Returns an error if the card number is from another issuer.
• CCGetLast (name) - returns a value from the most recent transaction response that corresponds with the name parameter.
• CCLastAVS- returns the gateway's Address Verification System Response for the last payment which was processed. This response is typically a one letter indicator, meaning the following:

Code	Description	Network
A	Street address matches, but 5-digit and 9-digit postal code do not match.	Standard domestic
B	Street address matches, but postal code not verified.	Standard international
C	Street address and postal code do not match.	Standard international
D	Street address and postal code match. Code "M" is equivalent.	Standard international
E	AVS data is invalid or AVS is not allowed for this card type.	Standard domestic
G	Non-U.S. issuing bank does not support AVS.	Standard international
I	Address not verified.	Standard international
M	Street address and postal code match. Code "D" is equivalent.	Standard international
N	Street address and postal code do not match.	Standard domestic
P	Postal code matches, but street address not verified.	Standard international
R	System unavailable.	Standard domestic
S	Bank does not support AVS.	Standard domestic
U	Address information unavailable. Returned if the U.S. bank does not support non-U.S. AVS or if the AVS in a U.S. bank is not functioning properly.	Standard domestic
W	Street address does not match, but 9-digit postal code matches.	Standard domestic
X	Street address and 9-digit postal code match.	Standard domestic
Y	Street address and 5-digit postal code match.	Standard domestic
Z	Street address does not match, but 5-digit postal code matches.	Standard domestic

• CCLastCCV- returns the gateway's Card Code Verification Response for the last payment which was processed. This response is typically a one letter indicator, meaning the following:
  • M- CVV2/CVC2 Match - Indicates that the card is authentic. Complete the transaction if the authorization request was approved.
  • N- CVV2 / CVC2 No Match – May indicate a problem with the card. Contact the cardholder to verify the CVV2 code before completing the transaction, even if the authorization request was approved.
  • P- Not Processed - Indicates that the expiration date was not provided with the request, or that the card does not have a valid CVV2 code. If the expiration date was not included with the request, resubmit the request with the expiration date.
  • S- Merchant Has Indicated that CVV2 / CVC2 is not present on card - May indicate a problem with the card. Contact the cardholder to verify the CVV2 code before completing the transaction.
  • U- Issuer is not certified and/or has not provided visa encryption keys
• CCLastChargeResult - returns the gateway's result code for the last operation.
• CCLastPaymentAuthCode - returns the gateway's approval code for the last payment which was processed with CCProcessPayment.
• CCLastPaymentTransactionID- returns the gateway's transaction ID for the last payment which was processed with CCProcessPayment.
• CCLastRawResponse- returns the gateway's raw text response for the most recent transaction.
• CCValidateCardNumber (cardNumber) determines if a card number is valid. Does not indicate the validity of the card itself, only its number. Returns either a 1 for valid card, or 0 for invalid cards.
• CCLastError - returns the text of the last error triggered by a plugin function.
• CCLicenseInfo - returns information about the license used.
• CCVersion - returns the version of the credit card plugin which is installed.

Getting Help

If you still need help, there are several resources available! FMForums hosts a support forum for 360Works products. Please look through the posts and see if your question has been posted before making a new topic.

Support is also available via email at plugins@360works.com. You can also call us at 770-234-9293. We offer many services in addition to our plug-ins, so let us know if you'd like a little help integrating the plug-in into your solution. Or if you'd be interested in a customized plug-in or development please let us know!